Taxi Driver Online

I have had trouble with the nearside sliding door for quite some time, with it coming out of alignment. The door has already been replaced once but I am having the same trouble all over again, it is so bad that from the inside you can see daylight through the gap in the top corner.

Some time ago I received this reply from cabs direct, tbh I still cannot believe the answer given. The main dealer that I have been taking it to do not seem to have the answer to getting it back into alignment. Has anyone else had the same problems - if so how did your dealer manage to sort it.

copy of e-mail reply below.


Thank you for taking the time to use our Customer Service information email facility.

I am sorry to learn that you are having problems with your sliding doors, the doors can twist due to
people slamming and when this happens top male and female ends do not insert. This causes the a twist with the lower half of the door closed, and the top half still open.

To prevent this the doors must be adjusted top and bottom, with all locations lining up, when this is exact and the door is now closed, you might find that the top of the door is wide at the top corner.

With the door half opened you must then physically go inside the vehicle and pull the top corner in by hand with slight force, you must put your knee on the door for support and pull in very carefully so you don't crease it.
Keep trying after adjustment until the door starts to shape into the contour of the door aperture it will eventually start to compress the door rubber seals when the at the correct shape.

Customer Services Manager

_________________
if you cannot be yourself, then who can you be.

_________________
IDFIMH

Priceless

_________________

http://wingsoverscotland.com/ http://www.newsnetscotland.com/

Top repair advice.

BEND THE DOOR!!!

why dont you go to the office of fair trading with that reply. im sure they will love that.

_________________
posted new E7 problems.

I had a similar problem with a bluebird, I took it to the dealer and he had a look then phoned the body shop the panel beater came over took one look at it then opened the door and put his knee against it and bent it in and that sorted it

bit like these fellows then

http://uk.youtube.com/watch?v=zBsPFI--muo

And Does Door Glass Bend as far as the Metal frame..or does it just disintegrate into a Billion pieces??