| Taxi Driver Online http://www.taxi-driver.co.uk/phpBB2/ |
|
| tx11 starter motors http://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=10364 |
Page 1 of 1 |
| Author: | stephenjamesalexander [ Thu Jan 01, 2009 8:34 pm ] |
| Post subject: | tx11 starter motors |
A mate of mine has got a tx11,silly him? his problem is he has gone through 5 starter moters in 3 years, the questions are, is the garage he is using,putting on cheap starter motors can he re-bush these starter motors anyone know were he can get a good starter, anyone else had these problems, please help him |
|
| Author: | taxitone [ Fri Jan 02, 2009 3:14 pm ] |
| Post subject: | starter motors |
where is your friend based, all starters can be re-bushed i know a five star man for the job but he is in grays essex |
|
| Author: | skippy41 [ Fri Jan 02, 2009 4:43 pm ] |
| Post subject: | |
Just a thought has your friend had the earth strap checked and the live, there could be a problem with one of them that keeps fecking up the starters |
|
| Author: | stephenjamesalexander [ Fri Jan 02, 2009 9:18 pm ] |
| Post subject: | tx11 starter motors |
thanks but based in tne north west |
|
| Author: | MR T [ Fri Jan 02, 2009 11:41 pm ] |
| Post subject: | |
The TX 2 starter motors are always going.... more so with the manual gearbox............. automatics tend to be more reasonable............. the fault is the clutch..... it breaks up and fills the starter motor with massives amounts of dust .....it's actually the flywheel that breaks up.. |
|
| Author: | devilhunter [ Mon Jan 05, 2009 7:34 pm ] |
| Post subject: | |
I have had my TX 2 clutch changed to a normal solid clutch and flywheel. Best mod I ever made plus no more ruined starter motors. |
|
| Author: | stephenjamesalexander [ Mon Jan 05, 2009 7:45 pm ] |
| Post subject: | tx2 starter |
he has done the clutch conversion,still having problems |
|
| Author: | devilhunter [ Mon Jan 05, 2009 9:40 pm ] |
| Post subject: | Re: tx2 starter |
stephenjamesalexander wrote: he has done the clutch conversion,still having problems
Then he needs to change starter motors. I run a small fleet and not one has thrown a starter after the conversion. I do use a genuine LTI one though. |
|
| Author: | north stand upper [ Sat Jan 10, 2009 8:44 pm ] |
| Post subject: | Starter motors |
Solid flywheels = burnt out clutch bearings |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|