Taxi Driver Online
http://www.taxi-driver.co.uk/phpBB2/

tx2 egr valve
http://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=12080		 Page 1 of 1
Author:  taxitone [ Mon Aug 24, 2009 1:51 am ]
Post subject:  tx2 egr valve
these egr valve cause a lot of problems so ive been reading on here and other forums for tx2 owners , my question is , is there any way they can be by-passed or removed completly so we dont have to keep paying out to have them cleaned out / replaced or anything else associated with them
surely there mst be a solution, come on mr t help us out if anyone can you can mate
Author:  GBC [ Mon Aug 24, 2009 2:26 am ]
Post subject: 
Why don't you clean it out yourself?

My garage just jet washes it, it's done in a jiffy.
Author:  skippy41 [ Mon Aug 24, 2009 12:38 pm ]
Post subject: 
If its anything like the metro engine, you can rectify this with a 10p bolt from B@Q
Author:  Lemmo [ Tue Aug 25, 2009 4:59 pm ]
Post subject: 
Blocked mine...Hardly any smoke now...seems like more power...fuel economy seems abit better...just been tested and emmisions lowest I have ever known!
Author:  GBC [ Tue Aug 25, 2009 8:08 pm ]
Post subject: 
I'm no mechanic, but I presume the only function this EGR set up does is to cool the exhaust gas a little before being relesed from the rear exhaust pipe?
Author:  ALI T [ Sat Sep 05, 2009 10:12 am ]
Post subject: 
GBC wrote:
I'm no mechanic, but I presume the only function this EGR set up does is to cool the exhaust gas a little before being relesed from the rear exhaust pipe?

no its to recircualte the spent exhaust gases back through the inlet manifold.
egr (exhaust gas recirculation)
does bugger all but glog up yer inlet.
put a solid plate over it.(sandwiched between the egr and the inlet maifold youl see a gasket take it out and replace it with a solid one)
if you cant make youre own ,youre garage will know how to sort it no probs
easy fix.
if only you could do that to all the sensors on a modern car,all this anti pollution is a pile of [edited by admin],perfectly good engines wont work because of a faulty sensor.and there everywhere on modern cars.

btw mr t wont help you his knowledge cost money. :lol:
Author:  MR T [ Sun Sep 06, 2009 11:41 am ]
Post subject: 
Mr T does not work on the Ford engine.... he does not like them.... So Mr T makes no comment...... better good advice from people that do... :roll:
Author:  wannabeeahack [ Sun Sep 06, 2009 12:40 pm ]
Post subject: 
if the EGR has a sensor on it then a solid plate needs a 5mm hole in it to fool the ECU otherwise you will get an error code, etc.

how Ford made this work on jaguar 2.2 deisels whilst mondeos smoke is the question.... or did they?

my 130ps 6 speed modeo and Tourneo (same engine, different location for EGR) both smoked, but not once the vacuum pipe for the EGR somehow came off...
Author:  ALI T [ Sun Sep 06, 2009 2:58 pm ]
Post subject: 
MR T wrote:
Mr T does not work on the Ford engine.... he does not like them.... So Mr T makes no comment...... better good advice from people that do... :roll:

you mean!!! you only have nissans ???
surely not! they must be buckets
unless you have tx4's or vans :?: :?:
just an observation.
of course if youre refering to customers taxi's
then what kind of a mechanic does that make you

picky or what :lol:
Author:  MR T [ Sun Sep 06, 2009 10:40 pm ]
Post subject: 
Very picky.... But then I can afford to be..... :lol:
Author:  ALI T [ Mon Sep 07, 2009 7:35 am ]
Post subject: 
MR T wrote:
Very picky.... But then I can afford to be..... :lol:

picky or incapable
more of a hobby than a business methinks :wink:
ive heard youve been robbing drivers for years :lol:
Author:  captain cab [ Mon Sep 07, 2009 3:17 pm ]
Post subject: 
ALI T wrote:
picky or incapable
more of a hobby than a business methinks :wink:
ive heard youve been robbing drivers for years :lol:


Thats robbing as opposed to getting a free plate, putting a shed on the road and selling a £500 scrapper for £50K plus? :lol:

CC
Author:  ALI T [ Mon Sep 07, 2009 8:18 pm ]
Post subject: 
captain cab wrote:
ALI T wrote:
picky or incapable
more of a hobby than a business methinks :wink:
ive heard youve been robbing drivers for years :lol:


Thats robbing as opposed to getting a free plate, putting a shed on the road and selling a £500 scrapper for £50K plus? :lol:

CC

no thats called a sham or a con
and its there con
not mine
doing so has helped bring about its demise hopefully :wink:
Author:  MR T [ Mon Sep 07, 2009 8:21 pm ]
Post subject: 
It seemed what they say is true...... if you repeat bull*hit often enough..... you end believing it yourself....... :lol:
Author:  ALI T [ Tue Sep 08, 2009 2:07 am ]
Post subject: 
MR T wrote:
It seemed what they say is true...... if you repeat bull*hit often enough..... you end believing it yourself....... :lol:

come back and fill in the missing words will yi :oops: :oops:
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/