Taxi Driver Online

does any one have any ideas how you replace the sliding window buttons on the sliding passenger doors ,i have one that wont fasten and one that wont unlock they look a right pain in the jacksie to get off and replace

We had this answer from Chris the Fish earlier in the year, Hope it helps.


I didn't take the window out.

1. Remove the old parts completely.
2. Carefuly ease of the vertical sealing trim.
3. Seperate the outside and inside parts.
4. Carefully cut the minimum ammount from the "lip" to allow insertion with the fixed window still in situ.
5. Turn to put the missing bit at the bottom.
6. Push the "holding ring" into its groove (a plastic bottle top of the right size with the top off is the easiest way to achieve this or the plastic middle of sellotape or similar but it must be the right size). Once it is on you are going to have a hell of a job getting it off again without breaking it so be careful.
7. Glue back the trim (with rubber glue in case you need to do the job again in the future).
8. Jobs a good 'un.

If this is not clear enough, PM me and I will try to be more detailed.
_________________
Chris The Fish

_________________
if you cannot be yourself, then who can you be.

You can get the replacements at Fiat, Citroen or Peugeot dealers. They all charge different prices for something that is exactly the same, so ring them all and take the best deal.

_________________
Chris The Fish

http://www.youtube.com/watch?v=Gdlyi5mc ... re=related

cheers already got the new ones but could not remember how we fitted them so cheers lads for the help