help! I am attempting to drive a tx2 which is constantly cutting out apparently the chain and tensioner where done last september. so hopefully not that any other Ideas anyone please
](./images/smilies/eusa_wall.gif "Brick wall")
| Taxi Driver Online http://www.taxi-driver.co.uk/phpBB2/ |
|
| tx2 cutting out http://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=13377 |
Page 1 of 1 |
| Author: | snr blue [ Tue Feb 09, 2010 1:09 pm ] |
| Post subject: | tx2 cutting out |
help! I am attempting to drive a tx2 which is constantly cutting out apparently the chain and tensioner where done last september. so hopefully not that any other Ideas anyone please
|
|
| Author: | snr blue [ Tue Feb 09, 2010 11:18 pm ] |
| Post subject: | Re: tx2 cutting out |
snr blue wrote: help! I am attempting to drive a tx2 which is constantly cutting out apparently the chain and tensioner where done last september. so hopefully not that any other Ideas anyone please
Ok well the cab stopped running but we've managed to get it going again, but it won't idle. Suspect a faulty diaphram on fuel filter going to replace that tomorrow. Meanwhile any body give me some help with the positioning of A.the throttle position sensor B. the idle control sensor pllleeeasssee!!! 
|
|
| Author: | GBC [ Wed Feb 10, 2010 2:50 pm ] |
| Post subject: | |
The internal chain and hydraulic tensioner can need replacing from 6 months to 6 years or beyond. Depends what sort of quality parts / job they done. I had my one replaced within 16 months of the previous replacement by Mann and Overton. And they're a main dealer. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|