Taxi Driver Online
http://www.taxi-driver.co.uk/phpBB2/

chain or belt?
http://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=15115		 Page 1 of 1
Author:  Bazfreezer [ Sat Oct 16, 2010 10:01 am ]
Post subject:  chain or belt?
hi could anyone of you kind gents tell me ,is the 2.7 nissan engine belt or chain driven,and if belt at what intervals should it be changed thanks.
Author:  MR T [ Sat Oct 16, 2010 10:07 am ]
Post subject: 
It's neither .... its Cog driven ... all you need to do is change the oil and filter regular
Author:  Nigel [ Sat Oct 16, 2010 10:59 am ]
Post subject:  Re: chain or belt?
Bazfreezer wrote:
hi could anyone of you kind gents tell me ,is the 2.7 nissan engine belt or chain driven,and if belt at what intervals should it be changed thanks.


Them were the engines.
Author:  Bazfreezer [ Sat Oct 16, 2010 11:35 am ]
Post subject: 
thanks for that,oil change on the way then!
Author:  skippy41 [ Sat Oct 16, 2010 12:03 pm ]
Post subject: 
Bazfreezer wrote:
thanks for that,oil change on the way then!


Every 6K and it should run for ever.

BTW MrT, there could be an abundance of low mileage engines available due to the Nissan 4x4s being hammered with all the duty increases :wink:
Author:  taxitone [ Sun Oct 17, 2010 12:33 am ]
Post subject: 
is the terrano 2.7 engine the same as the tx1 and does it fit straight in
Author:  skippy41 [ Sun Oct 17, 2010 4:46 am ]
Post subject: 
taxitone wrote:
is the terrano 2.7 engine the same as the tx1 and does it fit straight in


Yes it is and should just drop in, perhaps MR T will enlighten you BTW thats the one I was on about in my last post

I wonder how much modifying it would take to convert the TX2 or 4 to one???
Author:  blackpool [ Sun Oct 17, 2010 9:12 am ]
Post subject: 
there is quite a bit of modifying to do, doesnt just drop in a tx2or 4 but there is a few companys around that do it
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/