| Taxi Driver Online http://www.taxi-driver.co.uk/phpBB2/ |
|
| ALLOY WHEELS http://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=15517 |
Page 1 of 2 |
| Author: | darth [ Tue Dec 07, 2010 1:53 pm ] |
| Post subject: | ALLOY WHEELS |
Just checked the new LTi (or LTC now) web site. I can specify ALLOY WHEELS!!!!! Can't find a picture of these though. Really want some for my TXII. Anyone know where I can find a picture of these??? darth. |
|
| Author: | ALI T [ Tue Dec 07, 2010 2:14 pm ] |
| Post subject: | |
ooohh dont know about that......wouldnae be me like. not on a taxi |
|
| Author: | cabbyman [ Tue Dec 07, 2010 6:39 pm ] |
| Post subject: | |
I have them on my Vectra. Saves a fortune in replacing wheel trims! |
|
| Author: | blackpool [ Tue Dec 07, 2010 8:17 pm ] |
| Post subject: | alloys |
you can see them on the website if you go through the customise vehicle .Otherwiswe check out taxibling.co.uk but you must have more money than sense !!
|
|
| Author: | darth [ Tue Dec 07, 2010 11:05 pm ] |
| Post subject: | |
Thanks for the replies - I think! Ali T, I have no idea what that means! Blackpool: Don't like the ones on that bling site - plus the site's out of date anyway. As for the LTC site, I can't find any 'proper' pics of them; only the little icon you click to add them when choosing 'extras' as you build the taxi. Does anyone know of full size pictures? darth. |
|
| Author: | cabbyman [ Wed Dec 08, 2010 12:40 am ] |
| Post subject: | |
Word of warning: If you fit non-factory fit alloys, you must tell your insurers. |
|
| Author: | ALI T [ Wed Dec 08, 2010 10:04 am ] |
| Post subject: | |
what i mean is for edinburgh anyway is the test is strict if you had chips/scuffs on alloys you may have to look at replacing them,and thats gonna cost you. |
|
| Author: | darth [ Wed Dec 08, 2010 11:37 am ] |
| Post subject: | |
Thanks Ali T, Gotcha! I try not to cross the invisible line between confidence & complacency, and without wanting to look cocky, I always keep my wheels away from kerbs - hence why I don't need cable ties on my trims (which the service centres used to keep putting on each time!). Cabbyman; Thanks, I know, but these will be alloys from the factory - if I can get them! And I would of course tell my insurers anyway. Still trying to see photos of them though... darth. |
|
| Author: | automaticdog [ Sat Jan 25, 2014 6:43 pm ] |
| Post subject: | Re: ALLOY WHEELS |
darth wrote: Just checked the new LTi (or LTC now) web site. I can specify ALLOY WHEELS!!!!! Can't find a picture of these though. Really want some for my TXII. Anyone know where I can find a picture of these?
|
|
| Author: | wannabeeahack [ Sat Jan 25, 2014 7:30 pm ] |
| Post subject: | Re: ALLOY WHEELS |
automaticdog wrote: darth wrote: Just checked the new LTi (or LTC now) web site. I can specify ALLOY WHEELS!!!!! Can't find a picture of these though. Really want some for my TXII. Anyone know where I can find a picture of these? ![]() untaxed |
|
| Author: | wannabeeahack [ Sat Jan 25, 2014 8:17 pm ] |
| Post subject: | Re: ALLOY WHEELS |
why do LTi's have such bulbous ugly hubs? |
|
| Author: | bloodnock [ Sun Jan 26, 2014 2:03 am ] |
| Post subject: | Re: ALLOY WHEELS |
wannabeeahack wrote: why do LTi's have such bulbous ugly hubs? Cos it Matches the rest of the Big ugly bulbous lump.. |
|
| Author: | wannabeeahack [ Mon Jan 27, 2014 12:56 pm ] |
| Post subject: | Re: ALLOY WHEELS |
where is that red on, its RHD but not on UK plates |
|
| Author: | blackpool [ Mon Jan 27, 2014 2:10 pm ] |
| Post subject: | Re: ALLOY WHEELS |
wannabeeahack wrote: where is that red on, its RHD but not on UK plates It was used for a review in India if i remember right. |
|
| Author: | gary [ Thu Jan 30, 2014 1:51 am ] |
| Post subject: | Re: ALLOY WHEELS |
They don't look too bad considering the need to have the hub sticking out. I wonder if they'll fit my 97 Fairway... |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|