Figured I'll go for 1 post with a few questions:

1) Front seat in the passenger luggage area. I have a stock drivers seat as a flip down not great for longer distances. Any suggestions on a sub frame? I know a full seat will be a squeeze, or are there other seat suggestions?

2) Can one determine the age of manufacture from the chassis number? Am thinking along the lines of insurance, Classic being cheaper.

3) How should the fuel filter be wired up?

4) Overdrive indicator lamp - how does one replace?

Thanks in advance

Figured I'll go for 1 post with a few questions:

1) Front seat in the passenger luggage area. I have a stock drivers seat as a flip down not great for longer distances. Any suggestions on a sub frame? I know a full seat will be a squeeze, or are there other seat suggestions?

2) Can one determine the age of manufacture from the chassis number? Am thinking along the lines of insurance, Classic being cheaper.

3) How should the fuel filter be wired up?

4) Overdrive indicator lamp - how does one replace?

5) Random I know - where/if possible to put a leisure/deep cycle battery for running stereo,internal lights, etc when not driving. 1 I have seen full size seats in the front probally bolted straight through the floor 2 I would of thought so 3 Not to sure what you mean as there are wires come of the bottom of it , supposed to light the red light next to overdrive and glow plug light when it needs changing,dont usually use it myself. 4 Why not swap the fuelfilter bulb for overdrive bulb they just pull out. 5 dont really know this one but suppose you could put it under passenger seat good luck take a look at campertaxi site might be of interest to you

Thanks in advance