A large box of swan vespa
| Taxi Driver Online http://www.taxi-driver.co.uk/phpBB2/ |
|
| TX 2 overheating airlock problems http://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=20423 |
Page 1 of 1 |
| Author: | Sideburn Sid [ Thu Oct 11, 2012 11:43 am ] |
| Post subject: | TX 2 overheating airlock problems |
I have continuing overheating trouble with 55 plate TX 2 . I've had it Block tested for the Head gasket, this has come up negative (no sign of blown gasket). Also seems to be creating an airlock, so no coolant is getting to the engine block.. Have replaced the Heater Matrix & corresponding pipes, but problem keeps coming back. Any helpful ideas would be welcome Sideburn Sid |
|
| Author: | skippy41 [ Thu Oct 11, 2012 1:41 pm ] |
| Post subject: | Re: TX 2 overheating airlock problems |
A large box of swan vespa
|
|
| Author: | gusmac [ Thu Oct 11, 2012 1:48 pm ] |
| Post subject: | Re: TX 2 overheating airlock problems |
skippy41 wrote: A large box of swan vespa 
|
|
| Author: | grandad [ Thu Oct 11, 2012 4:41 pm ] |
| Post subject: | Re: TX 2 overheating airlock problems |
skippy41 wrote: A large box of swan vespa That's a scooter isn't it? |
|
| Author: | Sideburn Sid [ Tue Oct 16, 2012 10:17 am ] |
| Post subject: | Re: TX 2 overheating airlock problems |
Thanx for the helpful comment's , Problem solved (however it could have gone down the Swan Vesta route)! Rad packed up....after much pipe replacement etc. Sideburn Sid |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|