Taxi Driver Online
http://www.taxi-driver.co.uk/phpBB2/

HA! garages.....what do they know
http://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=23699		 Page 1 of 3
Author:  wannabeeahack [ Mon Jan 06, 2014 9:51 am ]
Post subject:  HA! garages.....what do they know
Got quoted £40 to £140 to solve a leak on my car and did it myself for £3

then showed the lad his air filter and why his MPG and performance is blunted.....


glad ive got tools!

and fitted front pads @ £22 when quotes ranged from £90 upwards
Author:  Blackcab Bob [ Mon Jan 06, 2014 11:38 am ]
Post subject:  Re: HA! garages.....what do they know
Why bother when the tax man pays for repair's eusasmiles.zip eusasmiles.zip
Author:  wannabeeahack [ Mon Jan 06, 2014 1:29 pm ]
Post subject:  Re: HA! garages.....what do they know
Blackcab Bob wrote:
Why bother when the tax man pays for repair's eusasmiles.zip eusasmiles.zip


can I send HMRC the bill?

actually they only contribute 22% of any bill by way of tax relief, and that at the end of the tax year

would you rather your cab do 15mpg instead of 45mpg using the same calculation?
Author:  Baconsdozen [ Thu Jan 09, 2014 6:10 pm ]
Post subject:  Re: HA! garages.....what do they know
If you do it yourself you know how well its been done.
Author:  wannabeeahack [ Thu Jan 09, 2014 11:53 pm ]
Post subject:  Re: HA! garages.....what do they know
Baconsdozen wrote:
If you do it yourself you know how well its been done.


very true plus you know how good the parts are

I had a quote today for front discs and pads

Garage - supply and fit £166 (inc) or fit mine if i supply £50 (difference £116)

Ive bought a set of Mintex for £70, the garage wouldnt have fitted Mintex, so how come they wanted £116 for parts? (£46 dearer)

I cant fit the discs cos I know I cant crack the bolts (already tried)
Author:  Baconsdozen [ Fri Jan 10, 2014 10:19 am ]
Post subject:  Re: HA! garages.....what do they know
Last garage I did any work for would charge for oil in litres the same price as the litre cans they sold,quietly forgetting the oil came from bulk at well under half that price.
Heat is your best friend when removing really tight bolts (either that or the other extreme,ice). If they are mega tight though they will have to replace them if they break them :evil:
Author:  wannabeeahack [ Fri Jan 10, 2014 11:10 am ]
Post subject:  Re: HA! garages.....what do they know
Baconsdozen wrote:
Last garage I did any work for would charge for oil in litres the same price as the litre cans they sold,quietly forgetting the oil came from bulk at well under half that price.
Heat is your best friend when removing really tight bolts (either that or the other extreme,ice). If they are mega tight though they will have to replace them if they break them :evil:


When I was a HGV storeman I was buying oil in 45 gallon drums, it was about 50p/ltr, the firm was charging a lot lot more
Author:  sasha [ Fri Jan 10, 2014 8:17 pm ]
Post subject:  Re: HA! garages.....what do they know
wannabeeahack wrote:
Ive bought a set of Mintex for £70, the garage wouldnt have fitted Mintex, so how come they wanted £116 for parts? (£46 dearer)

I cant fit the discs cos I know I cant crack the bolts (already tried)

I get my pads for £19 (eurocarparts.com), same as the garage would fit unless I ask for a more expensive brand but like you they would charge the £40 list price +VAT.

To get the bolts off take the car for a drive first to heat them up or apply some heat direct to them, I had the same problem until I learnt this trick. Or get a long 'breaker bar' to remove them cold, it's handy to have a breaker bar in the socket set anyway.
Author:  wannabeeahack [ Fri Jan 10, 2014 11:13 pm ]
Post subject:  Re: HA! garages.....what do they know
sasha wrote:
wannabeeahack wrote:
Ive bought a set of Mintex for £70, the garage wouldnt have fitted Mintex, so how come they wanted £116 for parts? (£46 dearer)

I cant fit the discs cos I know I cant crack the bolts (already tried)

I get my pads for £19 (eurocarparts.com), same as the garage would fit unless I ask for a more expensive brand but like you they would charge the £40 list price +VAT.

To get the bolts off take the car for a drive first to heat them up or apply some heat direct to them, I had the same problem until I learnt this trick. Or get a long 'breaker bar' to remove them cold, it's handy to have a breaker bar in the socket set anyway.


mines 15", not tried it yet, then theres the posidrive setscrew to budge - it secures the disc to the hub, i used to have an impact drive.....
Author:  Baconsdozen [ Sun Jan 12, 2014 3:52 pm ]
Post subject:  Re: HA! garages.....what do they know
One trick I was taught years ago is to use a long bar to apply steady pressure to a really tight bolt then with the pressure still applied to get an assistant to hit the socket end of the bar.
The sudden shock often causes the bolt to 'let go' .
The worst ones are the socket headed bolts and some are actually locked in with a locking compound,this has to be heated before it will allow the bolt to release,there is a real chance of snapping off either the tool or head if you dont. (unless you are using one of those Chinese breaker bars that just bends)
Author:  wannabeeahack [ Sun Jan 12, 2014 5:19 pm ]
Post subject:  Re: HA! garages.....what do they know
thought about a 12v impact wrench

if they work
Author:  Baconsdozen [ Sun Jan 12, 2014 5:31 pm ]
Post subject:  Re: HA! garages.....what do they know
I'm dubious about those,you'd have to pick a decent quality,well known make as some of the cheap ones I've seen just aren't up to the job.
Author:  gusmac [ Sun Jan 12, 2014 6:13 pm ]
Post subject:  Re: HA! garages.....what do they know
wannabeeahack wrote:
sasha wrote:
wannabeeahack wrote:
Ive bought a set of Mintex for £70, the garage wouldnt have fitted Mintex, so how come they wanted £116 for parts? (£46 dearer)

I cant fit the discs cos I know I cant crack the bolts (already tried)

I get my pads for £19 (eurocarparts.com), same as the garage would fit unless I ask for a more expensive brand but like you they would charge the £40 list price +VAT.

To get the bolts off take the car for a drive first to heat them up or apply some heat direct to them, I had the same problem until I learnt this trick. Or get a long 'breaker bar' to remove them cold, it's handy to have a breaker bar in the socket set anyway.


mines 15", not tried it yet, then theres the posidrive setscrew to budge - it secures the disc to the hub, i used to have an impact drive.....


You need one of these.
http://www.amazon.co.uk/gp/product/B000 ... UTF8&psc=1
Author:  Baconsdozen [ Mon Jan 13, 2014 11:15 am ]
Post subject:  Re: HA! garages.....what do they know
Breaker bars do just that,they break. Thats why the heads are replaceable.
If the nuts are going to be that hard go for 3/4 drive.
Author:  sasha [ Mon Jan 13, 2014 1:22 pm ]
Post subject:  Re: HA! garages.....what do they know
wannabeeahack wrote:
then theres the posidrive setscrew to budge - it secures the disc to the hub, i used to have an impact drive.....

Aye, they're right buggers. If it's seized you've no chance without an impact wrench. Just remember to use lots of copper grease on nuts/bolts/screws and the face of the disc that contacts the hub when you put it all back together. I shattered a disc once trying to get it off the hub and ended up having to hire an angle grinder to get the rest off.
Page 1 of 3 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/