Taxi Driver Online
http://www.taxi-driver.co.uk/phpBB2/

E7 old style.
http://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=27535		 Page 1 of 1
Author:  Cabby John 1 [ Sun Sep 06, 2015 3:39 pm ]
Post subject:  E7 old style.
On the sliding door a metal insert at the top of the door locates into a plastic receiver located in the bodywork of the door frame, basically it stops the door rattling (of a fashion). Unfortunately the plastic receiver inserted into the frame, either comes out Or gets pushed through into the skin of the framework, forever lost until the day of dismantling.

I have used silicone to try and keep it located which lasts for a while, but not as long as I would like! Basically I need something that will glue plastic to metal.......any suggestions please?
Author:  Chris the Fish [ Sun Sep 06, 2015 8:28 pm ]
Post subject:  Re: E7 old style.
Adjust the door to fit and the plastic cups last for ages. When the cups break up or disappear into the door pillar, adjust the door and fit a new cup, they are really cheap.

If you glue one in successfully you will not adjust the door and do serious damage all of a sudden, it will cost much more than 100 cups will, to repair.
Author:  skippy41 [ Mon Sep 07, 2015 8:40 am ]
Post subject:  Re: E7 old style.
your cup runeth over :lol:
Author:  Cabby John 1 [ Mon Sep 07, 2015 10:46 am ]
Post subject:  Re: E7 old style.
Chris the Fish wrote:
Adjust the door to fit and the plastic cups last for ages. When the cups break up or disappear into the door pillar, adjust the door and fit a new cup, they are really cheap.

If you glue one in successfully you will not adjust the door and do serious damage all of a sudden, it will cost much more than 100 cups will, to repair.


I think that you can adjust them of a fashion, unfortunately much of it is down to passengers trying to slide he door down the street with great force.
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/