| Taxi Driver Online http://www.taxi-driver.co.uk/phpBB2/ |
|
| Tx2 transponder cable http://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=27801 |
Page 1 of 1 |
| Author: | Adamf [ Wed Oct 14, 2015 12:54 am ] |
| Post subject: | Tx2 transponder cable |
Hi there, has any one had any problems with tx2 transponder cable? Mine seems to stop every now and again and only way to clear it is to switch ignition off n on again and it clears the fault is this a classic sign that the cable or something else needs changing? Any one else had this problem? Many thanks |
|
| Author: | matty86 [ Wed Oct 14, 2015 12:58 am ] |
| Post subject: | Re: Tx2 transponder cable |
Whats its supposed to do? |
|
| Author: | Adamf [ Wed Oct 14, 2015 1:09 am ] |
| Post subject: | Re: Tx2 transponder cable |
Hi there, the transponders controls the speedo and also sends a pulse to the meter, but when it goes on mine the speedo stops and it thinks you are in stop mode so meter is only working on stop mode, thinking it's the transponder cable but it's just strange how it works again once ignition is turned off n on, like if it's all controlled by a ecu? Many thanks |
|
| Author: | MR T [ Wed Oct 14, 2015 11:13 am ] |
| Post subject: | Re: Tx2 transponder cable |
Adamf wrote: Hi there, the transponders controls the speedo and also sends a pulse to the meter, but when it goes on mine the speedo stops and it thinks you are in stop mode so meter is only working on stop mode, thinking it's the transponder cable but it's just strange how it works again once ignition is turned off n on, like if it's all controlled by a ecu? Many thanks Check your fuses , bad connections....and check your earth lead going to ecu.....under bonnet n/s front inner wing..10 mm nut |
|
| Author: | Adamf [ Sat Nov 14, 2015 4:37 am ] |
| Post subject: | Re: Tx2 transponder cable |
New transponder cable fitted and all working good |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|