Taxi Driver Online

Hi there, has any one had any problems with tx2 transponder cable? Mine seems to stop every now and again and only way to clear it is to switch ignition off n on again and it clears the fault is this a classic sign that the cable or something else needs changing? Any one else had this problem?

Many thanks

Whats its supposed to do?

Hi there, the transponders controls the speedo and also sends a pulse to the meter, but when it goes on mine the speedo stops and it thinks you are in stop mode so meter is only working on stop mode, thinking it's the transponder cable but it's just strange how it works again once ignition is turned off n on, like if it's all controlled by a ecu?

Many thanks

Check your fuses , bad connections....and check your earth lead going to ecu.....under bonnet n/s front inner wing..10 mm nut

_________________
Justice for the 96. It has only taken 27 years...........repeat the same lies for 27 years and the truth sounds strange to people!

New transponder cable fitted and all working good