| Taxi Driver Online http://www.taxi-driver.co.uk/phpBB2/ |
|
| clutch fail !! http://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=28405 |
Page 1 of 1 |
| Author: | ven2112 [ Sun Jan 24, 2016 2:08 pm ] |
| Post subject: | clutch fail !! |
so, driving about this morning for 2 hours, then my clutch went , no noise,no warning, just turned around a corner & it went to the floor, so had to leave the car & get a lift home, i thought i might have burst a hose or something but the fluid level is fine, only had a new clutch/slave/dmf fitted in june , that's me skint this week now, anyone any ideas what it could be ? also how long a warranty is on one ?
|
|
| Author: | skippy41 [ Sun Jan 24, 2016 4:22 pm ] |
| Post subject: | Re: clutch fail !! |
ven2112 wrote: so, driving about this morning for 2 hours, then my clutch went , no noise,no warning, just turned around a corner & it went to the floor, so had to leave the car & get a lift home, i thought i might have burst a hose or something but the fluid level is fine, only had a new clutch/slave/dmf fitted in june , that's me skint this week now, anyone any ideas what it could be ? also how long a warranty is on one ?clutch master cylinder gone if that's what happened, not expensive about an hours time with having to bleed the system, what vehicle is it, did you try pulling the peddle back up with your foot of hand |
|
| Author: | ven2112 [ Sun Jan 24, 2016 5:00 pm ] |
| Post subject: | Re: clutch fail !! |
skippy41 wrote: ven2112 wrote: so, driving about this morning for 2 hours, then my clutch went , no noise,no warning, just turned around a corner & it went to the floor, so had to leave the car & get a lift home, i thought i might have burst a hose or something but the fluid level is fine, only had a new clutch/slave/dmf fitted in june , that's me skint this week now, anyone any ideas what it could be ? also how long a warranty is on one ?clutch master cylinder gone if that's what happened, not expensive about an hours time with having to bleed the system, what vehicle is it, did you try pulling the peddle back up with your foot of hand cheers for the reply mate, yes i did try pulling the peddle back, but when i push it down again it stayed there & its a xtype jaguar, is that the "slave" cylinder you are on about ? had that done when the clutch got done |
|
| Author: | wannabeeahack [ Tue Jan 26, 2016 5:39 pm ] |
| Post subject: | Re: clutch fail !! |
ven2112 wrote: cheers for the reply mate, yes i did try pulling the peddle back, but when i push it down again it stayed there & its a xtype jaguar, is that the "slave" cylinder you are on about ? had that done when the clutch got done a 2.0d/2.2d AKA a John Deere Jag? a Mondeo Tdci with a jag body? the CSC (Concentric Slave Cylinder) is inside the bellhousing (what a fecking great idea....not), if thats fubar its gearbox off time |
|
| Author: | ven2112 [ Tue Jan 26, 2016 6:04 pm ] |
| Post subject: | Re: clutch fail !! |
wannabeeahack wrote: ven2112 wrote: cheers for the reply mate, yes i did try pulling the peddle back, but when i push it down again it stayed there & its a xtype jaguar, is that the "slave" cylinder you are on about ? had that done when the clutch got done a 2.0d/2.2d AKA a John Deere Jag? a Mondeo Tdci with a jag body? it is a mondy set up mate & yes its a gearbox out job & a week off !! the CSC (Concentric Slave Cylinder) is inside the bellhousing (what a fecking great idea....not), if thats fubar its gearbox off time |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|