Taxi Driver Online
http://www.taxi-driver.co.uk/phpBB2/

TX2 - Warning Noise / CCU
http://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=34712
Page 1 of 1

Author:  Lofc2909 [ Mon Aug 12, 2019 11:14 am ]
Post subject:  TX2 - Warning Noise / CCU

Hi - my 54 plate TX2 has gained a fault which I'm trying to work out. Basically, there's a constant high pitched warning noise which I can only stop by removing the 5a fuse to the CCU. I think the warning noise is a door open one although all of the doors are shut properly and the switches seem to operate the lights fine so can't see any issues with the switches themselves.

Can't think of anything else that causes this warning noise - no other lights on anywhere. Was wondering if the CCU unit is shagged?

Any ideas much appreciated.

Many thanks

Author:  x-ray [ Mon Aug 12, 2019 1:06 pm ]
Post subject:  Re: TX2 - Warning Noise / CCU

Seatbelt not fastened on the wheelchair side ???

Author:  LAtaxi [ Wed Aug 14, 2019 1:27 am ]
Post subject:  Re: TX2 - Warning Noise / CCU

It's the seatbelt for the wheelchair.

Drove me mad once. Somehow it got unclipped.

Author:  x-ray [ Wed Aug 14, 2019 10:06 am ]
Post subject:  Re: TX2 - Warning Noise / CCU

LAtaxi wrote:
It's the seatbelt for the wheelchair.

Drove me mad once. Somehow it got unclipped.


There’s an echo echo echo echo echo echo echo echo echo echo echo echo echo

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/