Taxi Driver Online
http://www.taxi-driver.co.uk/phpBB2/

Manual heater control valve
http://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=35990
Page 1 of 1

Author:  LondonCabbie7861 [ Sun Aug 09, 2020 10:17 pm ]
Post subject:  Manual heater control valve

Anyone know how to fit a manual heater control valve, cab is like a sauna think I’m a few stones lighter now, I had one fitted on my 52 plate,done by previous owner, but on my 06 I can’t seem to find the 2 pipes from the matrix that come into engine bay,looked everywhere, are they hidden or am I missing something.

Thanks

Author:  matty86 [ Tue Aug 11, 2020 6:11 pm ]
Post subject:  Re: Manual heater control valve

There at the back of the engine on the left side if you was standing at the headlights. They come off the handle bar metal pipes bend down and go down to the bulkhead.

You can't put a manual tap into a tx2 you can't cut the water off youl have to join them together to keep the flow of water. Hey limited space too.

Author:  LondonCabbie7861 [ Wed Aug 19, 2020 11:20 am ]
Post subject:  Re: Manual heater control valve

Thanks Matt

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/