Taxi Driver Online

UK cab trade debate and advice
It is currently Mon Dec 02, 2024 10:37 am

All times are UTC - 1 hour [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: TX2 Auto gearbox issue
PostPosted: Tue Jun 07, 2022 10:19 am 
Offline

Joined: Sat Jul 30, 2016 2:26 pm
Posts: 53
So as my tx2 passes the 300k mile mark its running better than ever :D Its actually running quite well apart from this issue that has suddenly occurred

When trying to reverse the cab off the drive which is uphill first thing in the morning it really struggles. It slips in reverse really badly and you really have to put your foot down and rev the bollocks off it to actually get it to move and other times it just wont move at all. Drives absolutely lovely in the forward gears but reversing is a nightmare. Once the box has warmed up and up to temp it'll reverse a bit better but i get this awful judder when reversing constantly. I've also had it before where it feels like it struggles to build up pressure. What it does is there'll be no drive in reverse and then it'll bang into gear and suddenly shoot off because i've got the pedal depressed quite far which is a real issue when parallel parking nearly hit the car behind me a couple of times because of this :badgrin: . I did change the oil and filter in the box about a year ago but it has only done about 800 miles since as it only gets used occasionally. I checked the level and its up to the max with a warm box. The only thing i've noticed is the fluid has gone brown even though its only done 800 miles not sure if thats the old fluid thats mixed with the new fluid.

Any ideas on what this could be. I suspect that it might need a box rebuild or new box but anything i can do or check?


Top
 Profile  
 
PostPosted: Thu Dec 15, 2022 9:10 pm 
Offline

Joined: Sat Jul 30, 2016 2:26 pm
Posts: 53
So took the taxi for it's mot today. Haven't really used it since this issue started. I seem to of completely lost reverse gear. Sometimes it will go when you absolutely rev the bollocks off it and then once moving its alright. I also had it where its stuck in first gear, switching to 2nd then drive would rectify this. Thinking maybe it might need a box rebuild. Any ideas?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 1 hour [ DST ]


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group