Does anyone know how the clock (below the meter) on a 2001 TX1 is removed to replace the bulb? No mention of this in my handbbook and i don't want to break any of the high quality mouldings
as i have enough rattles as it is! Thanks Pete
| Taxi Driver Online https://www.taxi-driver.co.uk/phpBB2/ |
|
| Replacing TX1 clock bulb https://www.taxi-driver.co.uk/phpBB2/viewtopic.php?f=9&t=11422 |
Page 1 of 1 |
| Author: | Cheersdrive [ Wed May 13, 2009 10:31 am ] |
| Post subject: | Replacing TX1 clock bulb |
Does anyone know how the clock (below the meter) on a 2001 TX1 is removed to replace the bulb? No mention of this in my handbbook and i don't want to break any of the high quality mouldings as i have enough rattles as it is! Thanks Pete
|
|
| Author: | Cheersdrive [ Tue May 19, 2009 4:59 pm ] |
| Post subject: | |
28 cabbies have looked at the post and not one word of advice, has no one had to replace their clock bulb? |
|
| Author: | noname [ Tue May 26, 2009 1:15 pm ] |
| Post subject: | |
if you havent already done it the clock can be gently prised out from the mounting and it will hang down on the wire. you will be able to see the bulb holder on the back of the clock. |
|
| Author: | Cheersdrive [ Sat Jul 25, 2009 10:46 am ] |
| Post subject: | |
Thanks noname.............................i,ve done just that, but thanks for the reply, good to know theres someone out there who cares ! |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|