jimbo wrote:
skippy41 wrote:
Would be a simple job to convert to rhd, find one in a scrappy and get the bits, all the holes will be there for changing the dash and seats over
You must be simple if you think it would be that easy.
But maybe you should buy it and show us how it's done.
You'll need a WAV sooner or later anyway.
All you would require is the steering wrack, a rhd dash the clocks would swap over you may need the loom also, to change the ramp over just lift the floor as it bolts down and swap it over, the drivers seat will also change over all the holes will be there some of them may have blanking plates welded or just have rubber grommets in, dont forget they where made here and there will most definitely be some in the scrappy you can get the bits from
what a half baked moron you are Jimbo, sit and think before you put your half a brain in gear
Don't forget you will also have to change the chassis ......
Login
Register
FAQ
